Left Sliding Door Theft Shield Security Guard Plate Kit Fit For Ford Transit Custom 2012-

Feature:
The Problem You Face:
閵嗘€慳sy to Break In閵?The OEM door lock is a known weak spot. Thieves can drill a small hole in the door and easily manipulate the lock mechanism from inside.
閵嗘€宱stly & Lengthy Repair閵? A break-in often forces you to replace the entire door and pay for respraying閳ユ攣 heavy financial and time burden.
閵嗘€塴arms React Too Late閵? Standard alarms only trigger after thieves are already inside, making them an ineffective deterrent.
The Door Lock Shield Kit閿涙瓔top break-ins before they happen. No need for a new door or expensive alarm system!
What You Get:
閵嗘€恥al-Layer Steel Defense閵? Combines a 2.5mm stainless steel external shield with a 2.5mm powder-coated steel internal shield. This adds 5mm of hardened protection over the vulnerable area閳ユ攩ar stronger than the van's original ~1mm door skin.
閵嗘€磇sual Deterrent that Works閵? The visible external shield sends a clear message to thieves: "This van is protected. Move on." It prevents attempts before they start.
閵嗘€璻otect & Repair in One Kit閵? Ideal for both preventing future attacks and repairing/covering existing drill holes from past break-ins.
閵嗘€宱st-Effective & Simple閵? A fraction of the cost of door replacement or professional alarm installation. Easy to fit and provides permanent peace of mind.
1:Design inner and outer plate for double security
2:Own different test machines to design exact accurate parameter for our products.All items were tested for performance.
3:Aftermarket product with premium quality.
4:Stable performance, high reliability,suitable for replacing your broken one.

Specifics:
Condition:100% Brand New
Material閿?04 stainless steel
Type:Sliding Door Theft Shield Security Guard Plate Kit
Placement on Vehicle:Left Sliding door side
Fitment Type: Direct Replacement

Fitment:
Fit For Ford Transit Custom 2012-
Note:This Kit is designed for the left-side door!!!

Installation:
1.Using a 2 mm drill bit, mark the hole positions according to the Foam gasket we provide, and then drill the holes.
Increase the drill bit size by 1 mm each time, repeating this process until all holes are 6 mm in diameter.
2.Take a paint pen or touch-up kit and go over all of the drilled holes with the paint, this will prevent rust. Ensure to go over the hole that thieves had made should your vehicle have previously been broken into. Do this for the exterior and interior skin.
Take good quality Anti-Corrosion Wax and spray over the interior door holes (where the holesaw has been used). This will add another layer of protection against rust.
3.Press in the door shield and install all the washers over the studs, then install the Nyloc nuts. Using a 10mm spanner to tighten the nuts. Be careful not to overtighten any of the nuts. The door should sit flush with the gasket.If the nuts are overtightened,the studs may snap.

Package Include:
1 x Sliding door stainless steel exterior protective shield
1 x Green powdercoated steel interior protective shield
1 x Closed cell foam gasket
9 x Stainless steel nyloc Nuts
9 x Stainless steel washers
(show as pictures)
[* Instruction is not included!]
閿涘湯trictly Tested , High Quality Products閿?br>
Note:
1.Please check the description or use the year/make/model check finder and replace part numbers to confirm the compatibility before purchasing.
2.Professional installation is recommended.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems