30A/60A Embedded Snap-On Energy Storage Dedicated MPPT Solar Controller Bluetooth APP Intelligent Solar Control

Safety Instructions:
1.This controller is 12V/24V automatic adaptation or manually set the appropriate battery charging mode. When installing for the first time, please make sure that the battery has enough voltage to start and automatically set the controller parameters.
2.The battery cable should be as short as possible to minimize loss.
3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel and other batteries). If you charge a lithium battery, you must be familiar with its battery characteristics, and you must set the charging para meters before you can use it. For example: charge 12V lithium battery, As of output protection setting 9.5V, full protection 12.5 V, start charging voltage 11.5V when the battery drops.
4. The charge regulator is only suitable for , regulating solar modules Never connect another charging source to the charge regulator..
5. The battery protection board must be provided when charging the lithium battery, and the products of the lithium battery manufacturer with certification and meeting the national requirements must be selected. It is strictly forbidden to charge directly without a protective plate, and it is strictly forbidden to recharge the lithium battery pack without permission.

Features:
1. The industrial-grade master control chip, AD sampling precision, temperature, level 16 charging current, discharge current, the cumulative output real-time display, screen shows at the same time, be clear at a glance.
2. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking.
3.large-screen LCD display, adjustable charging and discharging parameters. Ultra-wide charge and discharge adjustable, as long as you understand the characteristics of the battery set its corresponding charging parameters, you can charge a battery. When the output is off, the time can be adjusted, which is more convenient (on the market, there is no point adjustment).
4.a complete three-phase charge management, effectively protect the battery, the battery is more durable.
5. built-in overheating, overcurrent, short circuit, open circuit protection, reverse connection protection, when the fault is eliminated, the controller automatically recovers, does not damage the device.
6. bidirectional MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat.

Specifications:
Type: MPPT Controller
Color: Blue
System Voltage:12V/24V
Rated Charge Current: 30A
Rated Discharge Current: 15A
Self-Consume: <10mA
USB Output: 5V/2A MAX
Operating Temperature: -10-+60℃ 
Siez/Weight : 133×70×35mm/150g 
 
Package included:
1x MPPT Solar Controller
1 x User Manual