{"title":"PCPrinters","description":null,"products":[{"product_id":"hp-officejet-pro-8630-printhead-950-951-copy","title":"Hp officejet pro 8640 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713728751,"sku":"W002-D005~11","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-6.jpg?v=1787484785"},{"product_id":"hp-officejet-pro-8620-printhead-950-951-copy","title":"Hp officejet pro 8630 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713761519,"sku":"W002-D005~10","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-6_41585c84-3d35-41c2-b4fb-82560a2c1b08.jpg?v=1787484786"},{"product_id":"hp-officejet-pro-8610-printhead-950-951-copy","title":"Hp officejet pro 8620 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713794287,"sku":"W002-D005~9","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-6_6bad912b-3e32-451d-8049-912df46c4289.jpg?v=1787484790"},{"product_id":"hp-officejet-pro-276dw-printhead-950-951-copy","title":"Hp officejet pro 8610 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713827055,"sku":"W002-D005~8","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_1b34f9d1-3c75-4d17-bcb2-0005876126ca.jpg?v=1787484792"},{"product_id":"hp-officejet-pro-251dw-printhead-950-951-copy","title":"Hp officejet pro 276dw Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713859823,"sku":"W002-D005~7","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_a7f0f1fe-1d94-4929-b9f2-8c15965fdc18.jpg?v=1787484793"},{"product_id":"hp-officejet-pro-n811a-printhead-950-951-copy","title":"Hp officejet pro 251dw Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713892591,"sku":"W002-D005~6","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_6159de56-c6c0-4eab-a0bf-2c13d165e4fd.jpg?v=1787484795"},{"product_id":"hp-officejet-pro-cm752-printhead-950-951-copy","title":"Hp officejet pro N811A Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713925359,"sku":"W002-D005~5","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_d4a42d9a-acef-4835-840c-1d98476877fa.jpg?v=1787484797"},{"product_id":"hp-officejet-pro-cm751-printhead-950-951-copy","title":"Hp officejet pro CM752 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713958127,"sku":"W002-D005~4","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_8554f74f-d1dd-43f0-aaa1-cd6b012abafd.jpg?v=1787484799"},{"product_id":"hp-officejet-pro-8600-printhead-950-951-copy","title":"Hp officejet pro CM751 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713990895,"sku":"W002-D005~3","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_1039a748-a873-4ae2-b0df-3881585ade2f.jpg?v=1787484801"},{"product_id":"hp-officejet-pro-8100-printhead-950-951-copy","title":"Hp officejet pro 8600 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563714023663,"sku":"W002-D005~2","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_ce4afe88-1dd3-45b1-bb51-372958921cda.jpg?v=1787484803"},{"product_id":"printhead-950-951-for-hp-officejet-pro-8100-8600-8610-8620-8630-8640-251dw-276dw-copy","title":"Hp officejet pro 8100 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563714089199,"sku":"W002-D005~1","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_ce7caac8-37a5-42ec-8c16-fd986da74caa.jpg?v=1787484805"},{"product_id":"hp-officejet-pro-8720-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8730 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563798991087,"sku":"W002-D030~10","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1.jpg?v=1787486821"},{"product_id":"hp-officejet-pro-7740-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8720 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563799548143,"sku":"W002-D030~9","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_cb4e44df-8ecf-49f2-b0ec-dd5e9cd09139.jpg?v=1787486823"},{"product_id":"hp-officejet-pro-7720-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 7740 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563799744751,"sku":"W002-D030~8","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_93de2893-5583-4c1f-a7e3-bfea10436325.jpg?v=1787486824"},{"product_id":"hp-officejet-pro-8210-printhead-952-953-954-955-j3m72-80004-copy-1","title":"Hp Officejet Pro 7720 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563799941359,"sku":"W002-D030~7","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_70596185-8b90-4af7-b7d2-23940e6fb13a.jpg?v=1787486826"},{"product_id":"hp-officejet-pro-8702-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8210 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563800301807,"sku":"W002-D030~6","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_201bece0-652d-462c-932e-785acfb149e6.jpg?v=1787486828"},{"product_id":"hp-officejet-pro-8715-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8702 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563800334575,"sku":"W002-D030~5","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_a3490281-7d0e-4fcb-b56a-2caa4d836076.jpg?v=1787486829"},{"product_id":"hp-officejet-pro-8710-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8715 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563800695023,"sku":"W002-D030~4","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_dbc096d3-e2f4-4d52-964c-c341178c842b.jpg?v=1787486831"},{"product_id":"hp-officejet-pro-8216-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8710 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563801383151,"sku":"W002-D030~3","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_32b6c38b-d2ec-4a3b-aa9d-f5e5b7ac2c1d.jpg?v=1787486832"},{"product_id":"hp-officejet-pro-8210-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8216 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563801579759,"sku":"W002-D030~2","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_63bced46-eed9-4a5d-9c82-731b9a2a7364.jpg?v=1787486833"},{"product_id":"printhead-952-955-for-hp-officejet-pro-8710-7740-7720-8720-8730-8740-8210-953-copy","title":"Hp Officejet Pro 8210 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563801776367,"sku":"W002-D030~1","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_acd565e3-8d78-446d-b9a1-101e75416b88.jpg?v=1787486835"},{"product_id":"full-color-printhead-print-head-for-pro10-pro-10-pro-10-qy6-0085","title":"Full Color PrintHead Print Head For Pro10 Pro 10 Pro-10 QY6-0085","description":"\u003cp\u003e\u003cspan\u003e\u003cspan style=\"font-size: 19px;\"\u003e\u003cb\u003eRefurbished QY6-0085 Printhead Fit for Pro10 Pro 10 Pro-10 Pinter \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeature:\u003c\/b\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : ?Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: ?QY6-0085\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible Models:\u003c\/b\u003e\u003cbr\u003eFit for Pro10 Pro 10 Pro-10 Pinter ?QY6-0085\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePacking includes:\u003c\/b\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50588527165679,"sku":"W002-D058","price":150.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/e5885dca33b0462a70ed6fb558e8718c.jpg?v=1787811080"},{"product_id":"2-wires-3d-printer-lcd-screen-display-kit-replacement-for-creality-3d-cr-10-s","title":"LCD Screen Display Controller Replacement For Creality CR-10S CR-10 3D Printer","description":"LCD Screen Display Controller Replacement For Creality CR-10,CR-10S S4 S5 3D Printer\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eDirect replacement LCD screen display for Creality CR-10,CR-10S 3D printer.\u003cbr\u003eSupports for RAMPS 1.4 control board.\u003cbr\u003eClear white characters with blue backlit.\u003cbr\u003eSupports for selecting the files to print.\u003cbr\u003eComes with two connecting cables.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003eCondition: 100% brand new and high quality.\u003cbr\u003eProduct Color: Green\u003cbr\u003eDisplay Mainboard Size: 92x85MM\/ 3.6\"x3.34\"\u003cbr\u003eDisplay Size: 70x40MM \/ 2.75\"x1.57\"\u003cbr\u003eScreen: LCD screen display\u003cbr\u003eFit for Creality 3D CR-10\/\u003cspan style='color: rgb(23, 26, 29); font-family: \"Microsoft YaHei\", \"Segoe UI\", system-ui, Roboto, \"Droid Sans\", \"Helvetica Neue\", sans-serif, Tahoma, \"Segoe UI Symbol\", \"Myanmar Text\", 微软雅黑; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: pre-wrap; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;'\u003eCR-10 Mini\u003c\/span\u003e CR-10S 3D Printer\u003cbr\u003e\u003cbr\u003ePackage List:\u003cbr\u003e1 x LCD Screen Display with 2 Cables","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50588914122991,"sku":"W002-A144","price":30.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/e499ebfba33aff15d80a26d03b0bd68c_b8f8a3f8-a08e-48a3-8e9b-54c2d112c9cc.jpg?v=1787822812"},{"product_id":"full-color-printhead-print-head-for-ip7500-ip7600-mp950-mp960-mp970-qy6-0062","title":"Refurbished Print Head Printhead For iP7500 iP7600 MP950 MP960 MP970 QY6-0062","description":"\u003cspan style=\"font-size: 18px;\"\u003e\u003cb\u003eRefurbished QY6-0062 Printhead Fit for iP7500 iP7600 MP950 MP960 MP970 Pinter \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeature\u003c\/b\u003e:\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : ?Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: ? QY6-0062 QY6-0062-000\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible Models:\u003c\/b\u003e\u003cbr\u003eFit for iP7500 iP7600 MP950 MP960 MP970 Pinter QY6-0062\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePacking includes:\u003c\/b\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50588920479983,"sku":"W002-D059","price":48.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/42c1124ccd98c693ca1faf477100791e.jpg?v=1787823058"},{"product_id":"5pcs-bl-touch-pin-probe-auto-bed-level-sensor-needle-fit-for-3d-touch","title":"5Pcs BL Touch Pin Probe Auto Bed Level Sensor Needle fit for 3D Touch","description":"\u003cp\u003e\u003cspan\u003e5PCS BL Touch Pin Probe Needle Replacement for 3D Touch Auto Bed Leveling Sensor\u003cbr\u003e\u003cbr\u003eDescription:\u003cbr\u003eA replacement push-pin for the BLTouch To protect the device, it can bend more easily than aluminum pins.\u003cbr\u003e\u003cbr\u003eFeature:\u003cbr\u003e5pcs Practical MKS automatic leveling sensor needle to ensure the safety of your printer.\u003cbr\u003eCost-effective upgrade kit and high performance.\u003cbr\u003eIt is made of high-quality and safe plastic materials and has a long service life.\u003cbr\u003eVery easy to operate, simple to install and use in combination.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eType: Self-leveling sensor probe\u003cbr\u003eLength: 35mm\/1.37in\u003cbr\u003eMaterial: Plastic\u003cbr\u003eQuantity: 5 pieces\u003cbr\u003eWeight: 10g\u003cbr\u003e\u003cbr\u003eCompatible with:\u003cbr\u003eThese 3D printer Auto Leveling Sensor Probe Needle compatible with Creality 3D printers, such as Ender-2\/ Ender-3\/ Ender-3 pro\/ Ender-5, also compatible with Creality CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc..\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e5 Pack Auto Leveling Sensor Probe Needle\u003cbr\u003e\u003cbr\u003eWarm notice:\u003cbr\u003eSmall accessories, please keep away from children.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cspan\u003e\u003cspan style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cspan\u003e\u003cspan style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003eWarranty:\u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003cspan style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003e\u003c\/span\u003e\u003cbr style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; white-space: normal; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003e\u003cspan style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; white-space: normal; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003e\u003cspan style='-webkit-font-smoothing: antialiased; color: rgb(58, 42, 47); font-family: \"Basic Commercial\", sans-serif; font-size: 15px; background-color: rgb(255, 255, 255); box-sizing: border-box !important;'\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50590274322671,"sku":"W002-A196","price":13.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/63e486c723c4852f05cb4002f9f228db.jpg?v=1787825267"},{"product_id":"printhead-952-955-for-hp-officejet-pro-8710-7740-7720-8720-8730-8740-8210-953","title":"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50631409271023,"sku":"W002-D030","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_bc9aabeb-c3aa-405a-abde-cd1e46392db7.jpg?v=1787909589"},{"product_id":"areyourshop-replacement-printer-print-head-qy6-0078-for-mg6220-6140-6180-6100-6150-6200","title":"Replacement Printer Print Head QY6-0078 for Canon MG6220 6140 6180 6100 6150 6200","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0078 QY6-0078-000 QY60078 QY6 0078\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003efor Canon MG6280 MG8180 MG8280 MP990 MP996 MG6120 MG6220 MG6140 MG6180 MG6250 MG6100 MG6150 MG6200 MG6210\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eFree Shipping\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eDelivery Time: 2-6 working days\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50631409729775,"sku":"W002-D035","price":37.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/75adc56694fb49bfbb9bfa7cdf5a8264.jpg?v=1787909613"},{"product_id":"replacement-printer-print-head-qy6-0039-fit-for-9100i-s9000-s900-i9100-f9000","title":"Full Color QY6-0039 Printhead Printer Head for Canon 9100i S9000 S900 i9100 F9000","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0039\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003eFit for Canon BJ F9000 F900 F930 PIXUS 9100i S9000 S900 i9100 QY6-0039\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eFree Shipping\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eDelivery Time: 2-6 working days\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50631410352367,"sku":"W002-D050","price":44.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/68d18798eb82dc227149a872923f8b6d.jpg?v=1787909636"},{"product_id":"upgraded-transparent-extruder-direct-drive-extruder-for-ender3-aquila-24v","title":"Upgraded Transparent Extruder Direct Drive Extruder for ENDER3 Aquila 24V","description":"\u003cp\u003e\u003cstrong style=\"color: rgb(255, 42, 0);\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures:\u003cbr\u003e1. High Quality: The Direct Drive Extruder structure lower torque requirements on stepper motor,Smooth Feed-in, reducing the possibility of nozzle blockage when retracting filament.\u003cbr\u003e2. High quality materials: Comes with 42-34 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant long service life.\u003cbr\u003e3. Greater Compatibility: The TITAN Extruder more fit for printing with PLA, TPU and other flexible filaments.\u003cbr\u003e4. Easy to install: With longer Extruder motor connecting cable for installation, easy to install.\u003cbr\u003e5. The upgraded version adds the compatible model Aquila.\u003cbr\u003e6. Transparent, you can see the discharge of the material inside, good heat dissipation, high temperature, and high-speed printing.\u003cbr\u003e7. Add 5015 fans on the left and right sides of the nozzle to increase the heat dissipation of the printed model and improve the printing speed\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003ewith the Terminal\u003cbr\u003eSuitable for: ENDER3\/ENDER3S\/ENDER3PRO\/Ender-3V2\/Aquila\u003cbr\u003eNozzle Size: 0.4mm\u003cbr\u003eOutput Voltage: DC24V\u003cbr\u003e\u003cbr\u003ePackage Includes:\u003cbr\u003e1 * Upgraded Version Transparent Titan Extruder Set\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"white-space: normal;\"\u003eShipping:\u003cbr style=\"white-space: normal;\"\u003eFree Shipping\u003cbr style=\"white-space: normal;\"\u003eDelivery Time: 2-6 working days\u003cbr style=\"white-space: normal;\"\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003eWarranty:\u003c\/span\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50631424999663,"sku":"W002-A219","price":57.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/5fa81f8f895fb10ea911c5bc7ff985ba.jpg?v=1787910022"},{"product_id":"printhead-950-951-for-hp-officejet-pro-8100-8600-8610-8620-8630-8640-251dw-276dw","title":"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632546943215,"sku":"W002-D005","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_ac3edc7d-f1cf-4028-b7dc-e5e027d3d0fa.jpg?v=1787931487"},{"product_id":"printhead-950-951-for-hp-officejet-pro-cm751-cm752-8100-8600-8610-251dw-276dw","title":"Printhead 950 951 For HP Officejet Pro CM751 CM752 8100 8600 8610 251dw 276dw","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632546975983,"sku":"W002-D005~2","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D005-_1.jpg?v=1787931489"},{"product_id":"printhead-qy6-0083-for-ip8720-ip8750-ip8780-mg7520-mg7180-inkjet-printer","title":"Printhead QY6-0083 for Canon iP8720 iP8750 iP8780 MG7520 MG7180 inkjet printer","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eCondition:ORIGINAL REFURBISHED\u003cbr\u003eSize:100x35MM\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003eFor Canon MG6310 MG6320 MG6350 MG6380 MG7120 MG7150 IP7110 MG7180 MG7520 MG7550 \u003cbr\u003eFor Canon IP8720 IP8750 IP8780 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eFree Shipping\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eDelivery Time: 2-6 working days\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632547008751,"sku":"W002-D010","price":40.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/348511962679738368.jpg?v=1787931491"},{"product_id":"printhead-for-epson-l300-l301-l303-l351-l355-l358-l111-l120-l210-l211-me401-303","title":"PrintHead For Epson L300 L301 L303 L351 L355 L358 L111 L120 L210 L211 ME401 303 Generic","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Printhead for Epson Printers\u003cbr\u003e2.High quality and durable\u003cbr\u003e3.Fit perfectly for your machine\u003cbr\u003e4.Full color function.\u003cbr\u003e5.100% Brand New\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eCondition: Original refurbished\u003cbr\u003eOEM code: FA04010 FA04000\u003cbr\u003eSize: 57x54MM\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003ePrint head for EPSON L110 L111 L120 L130 L132 L211 L210 L220 L222 L300 L301 L303 L335 L350 L351\u003cbr\u003eL353 L355 L358 L362 L365 L366 L380 L381 L400 L401 L455 L456 L541 L550 L551 L555 L565 L566 XP-300\u003cbr\u003eXP-302 XP-303 XP-305 XP-306 XP-310 XP-312 XP-313 XP-315 XP-322 XP-323 NX330 XP-332 XP-400 XP-401\u003cbr\u003eXP-402 XP-403 XP-405 XP-406 XP-410 XP-412 XP-413 XP-415 XP-420 XP-423 WF-2010 WF-2510 WF-2520\u003cbr\u003eWF-2521 WF-2530 WF-2531 WF-2540 WF-2541 WF-2630 WF-2640 WF-2650 WF-2660 WF-2010 WF-2510 PX300\u003cbr\u003ePX435A ET-2500 ET-2550 ET-4500 ET-4550 ME401 ME303\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"PrintHead For Epson L300 L301 L303 L351 L355 L358 L111 L120 L210 L211 ME401 303 Generic\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D001-2_480x480.jpg?v=1615023022\" width=\"428\" height=\"428\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cspan style=\"color: #ff8000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eFree Shipping\u003cbr data-mce-fragment=\"1\"\u003eDelivery Time:2-6 working days\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr data-mce-fragment=\"1\"\u003e24-Hour Expert Online:Solve your installation and product problems\u003cbr\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632547041519,"sku":"W002-D001","price":56.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D001-5.jpg?v=1787931493"},{"product_id":"4-slot-refurbished-printhead-for-hp-564-photosmart-d5468-d5400-c5370-c5393-c5380","title":"4 Color Refurbished Printhead For HP 564 Photosmart D5468 D5400 C5370 C5393 C5380","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e1.Condition:Original refurbished\u003cbr\u003e2.OEM code:Cb326-30002 Cn643a\u003cbr\u003e3.Replacement For HP 564 564XL, only for printer with 4-slot\u003cbr\u003e4.High quality and durable\u003cbr\u003e5.Fit perfectly for your machine\u003cbr\u003e6.Full color function.\u003cbr\u003e7.Size:81x56MM\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Printer List:\u003c\/strong\u003e \u003cbr\u003ePhotoSmart B8500,PhotoSmart B8550 ,PhotoSmart B8553 ,PhotoSmart B8558 ,Hp Photosmart-B110A\u003cbr\u003ePhotosmart B210A Photosmart B109A Hp Photosmart B109N,Photosmart B110A, Photosmart Plus B210A \u003cbr\u003ePhotoSmart C309 Series ,Photosmart Premium C309A ,Photosmart Premium C309G,PhotoSmart C309n ,\u003cbr\u003ePhotosmart Premium C310A ,Photosmart Premium C410A , Deskjet 3070A e-all-in-one-b 611A,\u003cbr\u003ePhotosmart Estation C510A ,PhotoSmart C5300 ,PhotoSmart C5324 ,PhotoSmart C5370 ,PhotoSmart C5373\u003cbr\u003ePhotoSmart C5380 ,PhotoSmart C5383 ,PhotoSmart C5388 ,PhotoSmart C5390 ,PhotoSmart C5393 ,\u003cbr\u003ePhotoSmart C6300 ,PhotoSmart C6324 ,PhotoSmart C6340 PhotoSmart C6350 ,PhotoSmart C6375 ,\u003cbr\u003ePhotoSmart C6380 ,PhotoSmart C6383 ,PhotoSmart C6388 ,PhotoSmart D5400 Series ,PhotoSmart D5445\u003cbr\u003ePhotoSmart D5460 ,PhotoSmart D5463 ,PhotoSmart D5468 ,PhotoSmart D7500 Series ,PhotoSmart D7560\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/5_483637ab-a8ef-4d6d-99a3-690e7f90ca9d_480x480.jpg?v=1614998931\" alt=\"\" width=\"463\" height=\"463\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/5_483637ab-a8ef-4d6d-99a3-690e7f90ca9d_480x480.jpg?v=1614998931\"\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr\u003eFree Shipping\u003cbr\u003eDelivery Time:2-6 working days\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632547729647,"sku":"W002-D002","price":25.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/b98cd3cf99bcd21cd331602c56c409b1.jpg?v=1787931520"},{"product_id":"564-printhead-fit-for-hp-5468-c5388-c6380-d7560-309a-c410-8558-cb326-30002","title":"564 Printhead for HP 5468 C5388 C6380 D7560 309A C410 8558 CB326-30002","description":"\u003cp\u003e\u003cstrong\u003e564 Printhead for HP 5468 C5388 C6380 D7560 309A C410 8558 CB326-30002\u003cbr\u003e\u003cbr\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead for 564 ink.\u003cbr\u003eIf the print head can't print colors.Please take out the print head from your printer,and use a white tissues to touch the mouth of the print head.\u003cbr\u003eIf the color print on the tissues,it means not the fault of print head,and you need to continue to troubleshoot.\u003cbr\u003eThe print head is cleaned and tested, and may contain a protective Solution and moisture, but does not affect the use\u003cbr\u003eThis is Aftermarket Replacement Item But Not Genuine\u003cbr\u003eSize:85x75mm\u003cbr\u003eSpecifications: 5-Slot\u003cbr\u003eType:564 Printhead\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003eCompatible Part #'s: CN642A\/CB326-30001\/CB326-30002\u003cbr\u003eRefurbished 564 Printhead\u003cbr\u003efor PhotoSmart 7510 7515 7520\u003cbr\u003efor PhotoSmart C309A C309G C309N C310A C410A C510A C310a C311a\u003cbr\u003efor PhotoSmart B8550 C6340 C6350 C6380 D5445 D5460 D7560\u003cbr\u003efor HP Photosmart B209A\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x 564 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin: 0pxpx 0pxpx 0pxpx 0pxpx; float: none;\" alt=\"564 Printhead fit for HP 5468 C5388 C6380 D7560 309A C410 8558 CB326-30002\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/4_1baf61fc-6442-43df-a330-74d9e6fc9c9d.jpg?v=1614998310\" width=\"446\" height=\"446\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632547762415,"sku":"W002-D013","price":25.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D013-ERP.jpg?v=1787931522"},{"product_id":"934-935-printhead-fit-for-hp-officejet-pro-6230-cq163-80060-6830-6815-6812-6835","title":"934 935 Printhead Fit for HP Officejet Pro 6230 CQ163-80060 6830 6815 6812 6835","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"color: #ff8000; font-size: medium;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAfter purchasing and receiving the goods, please pay attention to the following items:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip ( on the copper sheet). Don't use cleaning fluid or eraser.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"color: #ff8000; font-size: medium;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhen replacing the print head, please pay attention to the following items:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out , and even the print head will be burned out .\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning ( two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e8.Secondly, you can print more pictures to let the print head exhaust air during work. Third, if the machine has already take brought out the waste ink tube, you can cut off the power first, and then use a rubber tube to draw out the waste ink until 3-5ML of ink is drawn out. Next, turn it on again, and normally clean it once with the machine. That is, the air in the print head is artificially pulled out, but the side effect is that it’s easy to cause ink accumulation in the cleaning pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"388\" width=\"388\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/7_418d142d-0ef6-410a-80b0-94a4c9acc022_480x480.jpg?v=1615003437\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeature:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1.Excellent performance and high quality.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4.Good stability, long lifespan.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e5.Full color function.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e6.This is Aftermarket Replacement Item But Not Genuine.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e7.Size:90x45MM\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e8.OEM Part Number: CQ163-80060\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible Models:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRefurbished 934 935 Printhead\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFit For Hp Officejet Pro 6230\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFit For Hp Officejet Pro 6830\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFit For Hp Officejet Pro 6815\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFit For Hp Officejet Pro 6812\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFit For Hp Officejet Pro 6835\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePacking includes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1 x 934 935 print head\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr\u003eFree Shipping\u003cbr\u003eDelivery Time:2-6 working days\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"color: #ff8000;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632548253935,"sku":"W002-D031","price":37.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/039f0321dc2f7e1b6cc33c5fa25177a7.jpg?v=1787931534"},{"product_id":"replacement-printer-print-head-printhead-qy6-0059-for-ip4200-mp500-mp530","title":"Replacement Printer Print Head Printhead QY6-0059 for Canon IP4200 MP500 MP530","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0059 QY6-0059-000 QY60059 QY6 0059\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003efor Canon iP4200 MP500 MP530\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eFree Shipping\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eDelivery Time: 2-6 working days\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632548286703,"sku":"W002-D033","price":40.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/606f58ebd201c1077d63564e8c47b8fc.jpg?v=1787931537"},{"product_id":"replacement-printer-print-head-qy6-0070-for-mp510-mp520-mx700-ip3300-ip3500","title":"Replacement Printer Print Head QY6-0070 for Canon MP510 MP520 MX700 iP3300 iP3500","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0070 QY6-0070-000 QY60070 QY6 0070\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003efor Canon MP510 MP520 MX700 iP3300 iP3500\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eFree Shipping\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eDelivery Time: 2-6 working days\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632549728495,"sku":"W002-D034","price":35.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/0a478c56040d55b1c7897a3135ff2eed.jpg?v=1787931603"},{"product_id":"full-color-qy6-0068-replacement-printhead-printer-head-for-pixma-ip100-ip110","title":"Replacement Printer Print Head Full Color QY6-0068 Fit for PIXMA iP100 IP110","description":"Reufrbished QY6-0068 Printhead for PIXMA iP100 IP110 Replacement\u003cbr\u003e\u003cbr\u003eFeature:\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0068\u003cbr\u003e\u003cbr\u003eCompatible Models:\u003cbr\u003eFit for QY6-0068 PIXMA iP100 IP110\u003cbr\u003e\u003cbr\u003ePacking includes:\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632595996911,"sku":"W002-D054","price":60.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/0709e4290f9f04268304b640bfee09aa_39e3e90b-ec80-48c8-b387-e1931738ccbc.jpg?v=1787932492"},{"product_id":"replacement-printhead-print-head-for-pro-100-pro-100-qy6-0084","title":"Refurbished Print Head Printhead For PRO-100 PRO 100 QY6-0084","description":"\u003cspan style=\"font-size: 18px;\"\u003e\u003cb\u003eRefurbished QY6-0084 Printhead Fit for Pixma PRO-100 Pinter \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeature\u003c\/b\u003e:\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : ?Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: ? QY6-0084 QY6-0084-000\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible Models:\u003c\/b\u003e\u003cbr\u003eFit for PRO-100 PRO 100 Pinter QY6-0084\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePacking includes:\u003c\/b\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote\u003c\/b\u003e:\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632601108719,"sku":"W002-D060~HWP","price":140.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/24f69a2a4914bbb6eca64468edd5d527_4b607337-8678-4e85-bded-aab37468ba9b.jpg?v=1787932684"},{"product_id":"3d-printer-upgrade-parts-dual-z-axis-screw-rod-for-ender-3-ender-3-v2-pro","title":"3D Printer Upgrade Parts Dual Z-Axis Screw Rod for Ender-3\/Ender-3 V2\/Pro","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is an upgrade kit for Ender-3 series, which aims to help printer operate better. Successfully assemble would take you some time.\u003cbr data-mce-fragment=\"1\"\u003eBy upgrading to dual-Z-axis structure, it would improve printing quality, getting more precise mold than stock single Z-axis structure printer.\u003cbr data-mce-fragment=\"1\"\u003eThis kit fits for Creality Ender-3 series(not Ender-3 Max), Voxelab Aquila, and other 3D printer using 365mm (or approximate) lead screw rod.\u003cbr data-mce-fragment=\"1\"\u003eBy this kit, it could reduce Z-axis and X-axis vibration, which would make it get better accuracy.\u003cbr data-mce-fragment=\"1\"\u003eThen, by dual stepper motor drive and dual Z-axis srew rod transmission, it would be easier to do bed leveling.\u003cbr data-mce-fragment=\"1\"\u003eWe are committed to providing novel, practical and high-quality 3D printer accessories, they are mainly matched with Ender and CR series.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDetailed Steps\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1. Turn off the printer, unplug the power cord, and use a hex wrench to remove the two screws which are secure the power supply. Remove the power supply.\u003cbr data-mce-fragment=\"1\"\u003e2. Install the Coupler on the stepper motor and tighten the screws. Use the hexagon socket screws and the Z AxisMotor Bracket to fix the motor on the aluminum profile.\u003cbr data-mce-fragment=\"1\"\u003e3. Remove all the screws of sheet metal pulley on the right side of the X axis.\u003cbr data-mce-fragment=\"1\"\u003e4. Use long screws to fix the Z-axis sheet metal and install it on the X-axis right sheet metal. Screw the T8 screw into the screw nut to the coupler, and tighten the screw of coupler.\u003cbr data-mce-fragment=\"1\"\u003e5. Install dual Z stepper cable to the motherboard, and connect two Z motors.\u003cbr data-mce-fragment=\"1\"\u003e6. Install the Phillips screw and the boat nut on the power supply holder to install the power supply.\u003cbr data-mce-fragment=\"1\"\u003e7. Place the lead screw bearing guide on the left and right sides of the X-axis aluminum profile and let the Z-axis rise to the highest position. If one side is uneven,turn the corresponding coupler clockwise.\u003cbr data-mce-fragment=\"1\"\u003e8. Install the lead screw bearing guide and tighten the screws. Pay attention to the alignment position of the mount.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eType: 3D Printer Dual Z Axis Upgrade Kit\u003cbr data-mce-fragment=\"1\"\u003eColor: Black\u003cbr data-mce-fragment=\"1\"\u003eMaterial: Sheet Metal + Stainless Steel\u003cbr data-mce-fragment=\"1\"\u003eMaterial: sheet metal + stainless steel + stepping motor\u003cbr data-mce-fragment=\"1\"\u003eSuitable for: Compatible with Ender-3 \/ Ender-3 V2 \/3X\/ Ender-3 Pro 3D printers(and other 3D printer using 365mm (or approximate) lead screw rod.)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 * 3D Printer Dual Z Axis Upgrade Kit\u003cbr data-mce-fragment=\"1\"\u003e(Attached accessories as shown in the picture)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr data-mce-fragment=\"1\"\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632619884783,"sku":"W002-A201","price":45.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/29fab9871f8eb5dabbc4b84d5320a9cd.jpg?v=1787933281"},{"product_id":"refurbished-full-color-print-head-printhead-for-tx800-tx820-a800-f192040","title":"EPSON TX800 TX820 A800 F192040 Full Color PrintHead Print Head 6 Colors","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eExcellent performance and high quality.\u003cbr data-mce-fragment=\"1\"\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr data-mce-fragment=\"1\"\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr data-mce-fragment=\"1\"\u003eGood stability, long lifespan.\u003cbr data-mce-fragment=\"1\"\u003eFull color function.\u003cbr data-mce-fragment=\"1\"\u003eThis is Aftermarket Replacement Item But Not Genuine.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDESCRIPTION:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease confirm the fault part of your printer before you decide to replace a print head.\u003cbr data-mce-fragment=\"1\"\u003eIf the print head can't print colors.Please take out the print head from your printer,and use a white tissues to touch the mouth of the print head.\u003cbr data-mce-fragment=\"1\"\u003eIf the color print on the tissues,it means not the fault of print head,and you need to continue to troubleshoot.\u003cbr data-mce-fragment=\"1\"\u003eThe print head is cleaned and tested, and may contain a protective solution and moisture, but does not affect the use .\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eF192040 DX8 DX10 TX800 TX700 TX710 TX720 TX810 TX820 A700 A800 Printer\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x print head\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr data-mce-fragment=\"1\"\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632620179695,"sku":"W002-D064","price":230.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/377d63f84de6e3380b3f8776681c8dba.jpg?v=1787933294"},{"product_id":"3d-printer-42-40-42-34-x-y-z-e-stepper-motor-for-3d-creality-ender-3-pro-cr-10","title":"3D Printer 42-40 42-34 X\/Y\/Z\/E Stepper Motor For 3D Creality Ender 3 Pro CR-10","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eStepper Motor 42-34\u003cbr\u003eApply for 3D printer (like CR-10 Series Z or Ender-3 X\/Y\/Z ), machinery and equipment.\u003cbr\u003e1.8 degree step angle, 0.2N.M holding torque, with 0.8A rated current per phase.\u003cbr\u003eMotor size: 42 * 42 * 34mm (1.7 * 1.7 * 1.3in)\u003cbr\u003e\u003cbr\u003eStepper Motor 42-40\u003cbr\u003eApply for 3D printer (like CR-10 Series X\/Y\/E or Ender-3 E ), machinery and equipment.\u003cbr\u003e1.8 degree step angle, 0.4N.M holding torque, with 1.0A rated current per phase.\u003cbr\u003eMotor size: 42 * 42 * 40mm (1.7 * 1.7 * 1.58in)\u003cbr\u003e\u003cbr\u003eLower noise, strong torque, stable property and high accuracy.\u003cbr\u003eThis item does not include connecting cable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eMaterial: Metal\u003cbr\u003eStep Angle: 1.8 Degree\u003cbr\u003ePhase: 2\u003cbr\u003eHolding Torque: 0.4N.M\u003cbr\u003eShaft Diameter: 5mm (D-Shape)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eOnly step motor is included. The connecting cable is not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Inculded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 * Step Motor (42-40 or 42-34)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-A142-Set-2_f007dff1-0d20-4bc6-b720-e3e732dba44c_480x480.jpg?v=1620195001\" alt=\"3D Printer 42-40 42-34 X\/Y\/Z\/E Stepper Motor For 3D Creality Ender 3 Pro CR-10\" style=\"float: none;\" width=\"450\" height=\"450\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-A142-Set-2_f007dff1-0d20-4bc6-b720-e3e732dba44c_480x480.jpg?v=1620195001\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eFree Shipping\u003cbr data-mce-fragment=\"1\"\u003eItem location:California warehouse\u003cbr data-mce-fragment=\"1\"\u003eDelivery Time: 2-6 working days\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr data-mce-fragment=\"1\"\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"42-34 Motor","offer_id":50633192767727,"sku":"W002-A141","price":24.78,"currency_code":"USD","in_stock":true},{"title":"42-40 Motor","offer_id":50633192800495,"sku":"W002-A142","price":27.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/d6303981933bfa2b246d814d002e1b24_f59616a3-17cb-4c70-9b32-b50fb8b1bfa5.jpg?v=1787946029"},{"product_id":"printhead-for-ip7220-ip7250-ip7240-ip7210-mg5420-mg5450-mg6400-qy6-0082","title":"PrintHead for Canon iP7220 iP7250 IP7240 IP7210 MG5420 MG5450 MG6400 QY6-0082","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eCondition:ORIGINAL REFURBISHED\u003cbr\u003eSize:80x40MM\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003eFor Canon IP7200 IP7210 iP7220 IP7240 IP7250 IP7280\u003cbr\u003eFor Canon MG5420 MG5440 MG5450 MG5460 MG5470 MG5480 MG5520 MG5540 MG5550 MG5650 MG6400 MG6420 MG6440 MG6450 MG5752 MG5422\u003cbr\u003eFor Canon MX728 MX928 \u003cbr\u003eOEM Code\u003cy6-0082\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003c\/y6-0082\u003e\u003c\/p\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50633192931567,"sku":"W002-D009","price":36.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/348511870354853888.jpg?v=1787946039"},{"product_id":"replacement-printer-print-head-14n0700-fit-for-pro805-pro205-209-s408-s505-s508","title":"Full Color 14N0700 Printhead Printer Head for Lexmark Pro805 Pro205 209 S408 S505 S508","description":"\u003cp\u003eReufrbished PrintHead 14N0700 \/14N1339 \/ 14N1492 Fit for Lexmark 100 S301 S305 S405 S505 Pro205 705 805 901 905\u003cbr\u003e\u003cbr\u003eFeature:\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: 14N0700 \/14N1339 \/ 14N1492\u003cbr\u003ePro Series: Pro205, Pro705, Pro805, Pro901, Pro905\u003cbr\u003eS Series: S301, S305, S405, S505\u003cbr\u003e\u003cbr\u003eDESCRIPTION:\u003cbr\u003ePlease confirm the fault part of your printer before you decide to replace a print head.\u003cbr\u003eIf the print head can't print colors.Please take out the print head from your printer,and use a white tissues to touch the mouth of the print head.\u003cbr\u003eIf the color print on the tissues,it means not the fault of print head,and you need to continue to troubleshoot.\u003cbr\u003eThe print head is cleaned and tested, and may contain a protective solution and moisture, but does not affect the use .\u003cbr\u003e\u003cbr\u003eCompatible Models:\u003cbr\u003eFit for Lexmark Pro Series Pro205 Pro705 Pro805 Pro901 Pro905 and S Series S301 S305 S405 S505 Printers \u003cbr\u003e\u003cbr\u003ePacking includes:\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cspan\u003eWarranty:\u003c\/span\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50633195454703,"sku":"W002-D048","price":34.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/3e1436fdd3539af208084d29ecf059d4.jpg?v=1787946145"},{"product_id":"full-color-qy6-0055-printhead-printer-head-for-i9900-ip8500-i9950-ip9100-pro9000","title":"Full Color QY6-0055 Printhead Printer Head for Canon i9900 iP8500 i9950 ip9100 PRO9000","description":"\u003cp\u003e\u003cstrong\u003eWarm Tip:\u003cbr\u003e\u003c\/strong\u003ePlease note this product is used for the first generation printer: I9900, IP8500, I9950, IP9100, Pro9000 qy6-0055. Not for the second generation printer: I9900 I9950 IP8600 Pro9000 9900i Mark II QY6-0076. Please pay attention to this difference. Before you purchase, please figure out your own machine is first generation or the second generation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0055\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003eFit for Canon i9900, iP8500,i9950, ip9100,PRO9000 QY6-0055\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/42d63d674d41b6c23b46023e423fab9a_480x480.jpg?v=1620195528\" alt=\"Full Color QY6-0055 Printhead Printer Head for i9900 iP8500 i9950 ip9100 PRO9000\" style=\"float: none;\" width=\"450\" height=\"450\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003eNOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50633195520239,"sku":"W002-D042","price":58.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/c94ec7bb75901a6f4aa3884fb25b8c34.jpg?v=1787946148"},{"product_id":"reufrbished-printer-print-head-for-ip4600-ip4680-ip4700-ip4760-mp630-qy6-0072","title":"Replacement Printer Print Head QY6-0072 for Canon iP4600 iP4680 iP4700 iP4760 MP630","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: QY6-0072 QY6-0072-000 QY60072 QY6 0072\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003cbr\u003eFit for Canon iP4600 iP4680 iP4700 iP4760 MP630 MP640 QY6-0072\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking includes:\u003c\/strong\u003e\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you buy this product, you need to pay attention to:\u003cbr\u003eNOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e \u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003c\/p\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50633195553007,"sku":"W002-D041","price":32.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/d617641ca5d859b2706b73af2e349ac0.jpg?v=1787946150"},{"product_id":"reufrbished-printer-print-head-fit-for-pixma-pro9500-mark-ii-nozzle-qy6-0077","title":"Replacement Printer Print Head QY6-0077 Fit for PIXMA PRO9500 Mark II nozzle","description":"Reufrbished QY6-0077 Printhead for PIXMA PRO9500, PRO9500 Mark II nozzle\u003cbr\u003e\u003cbr\u003eFeature:\u003cbr\u003eExcellent performance and high quality.\u003cbr\u003eMade of high-quality material, durable, firm and stable for us to use.\u003cbr\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003eGood stability, long lifespan.\u003cbr\u003eFull color function.\u003cbr\u003eProduct Condition : ?Original Refurbished Printhead ,95% New.\u003cbr\u003eWarranty : One Year Free Warranty , Life-long Service.\u003cbr\u003eOEM code: ?QY6-0077\u003cbr\u003e\u003cbr\u003eCompatible Models:\u003cbr\u003eFit for PIXMA PRO9500, PRO9500 Mark II nozzle QY6-0077\u003cbr\u003e\u003cbr\u003ePacking includes:\u003cbr\u003e1 x print head\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station\u003cbr\u003eor find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003eBefore you install this product, you need to pay attention to:\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50633202696431,"sku":"W002-D051","price":64.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/acdf7ab68f591d9eee07952cfc58caf8_919f17b9-fb8f-4747-9077-57573d8bb576.jpg?v=1787946445"},{"product_id":"3d-printer-mk8-direct-drive-pulley-turbo-fan-extruder-for-cr-10-ender3-12v-24v","title":"3D Printer MK8 Direct Drive Pulley Turbo Fan Extruder for CR-10 Ender3 12V\/24V","description":"\u003cp\u003e\u003cstrong style=\"color: rgb(255, 42, 0);\"\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 19px;\"\u003e\u003cb\u003eOption 1(12V):\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. High Quality: Upgraded Version!!The Direct Drive Extruder structure lower torque requirements on stepper motor,Smooth Feed-in, reducing the possibility of nozzle blockage when retracting filament.\u003cbr\u003e2. High quality materials: Comes with 42-34 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant long service life.\u003cbr\u003e3. Easy to install: With longer Extruder motor connecting cable for installation, easy to install.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eOutput Voltage: 12V\u003cbr\u003ewith the Aviation Connector\u003cbr\u003eSuitable for: CR-10. CR-105 CR-10S4 CR-10S5\u003cbr\u003eNozzle Size: 0. 4mm\u003cbr\u003ePackage Includes: Extruder 1pc\u003cbr\u003e42-34 Stepper Motor 1pc\u003cbr\u003eHotend Kit 1pc\u003cbr\u003eStepper Motor Wirelpc\u003cbr\u003eV-slot Wheel 3pcs\u003cbr\u003eFixed Backplane x1pc 4010 Fanxlpc 5010 Turbo Fanxlpc\u003cbr\u003eColor: as the picture shows\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1x FULL Set 3D Printer Extruder Kits\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 19px;\"\u003e\u003cb\u003eOption 2(24V):\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. Upgraded Version!!High Quality: Upgraded Version!!The Direct Drive Extruder structure lower torque requirements on stepper motor,Smooth Feed-in, reducing the possibility of nozzle blockage when retracting filament.\u003cbr\u003e2. High quality materials: Comes with 42-34 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant long service life.\u003cbr\u003e3. Easy to install: With longer Extruder motor connecting cable for installation, easy to install.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eOutput Voltage: 24V\u003cbr\u003ewith the Terminal\u003cbr\u003eSuitable for: ENDER3\/ENDER3S\/ENDER3PRO\/Ender-3V2, TEVO. Alfawish etc. 24V 3D Printer\u003cbr\u003eNozzle Size: 0. 4mm\u003cbr\u003ePackage Includes: Extruder 1pc\u003cbr\u003e42-34 Stepper Motor 1pc\u003cbr\u003eHotend Kit 1pc\u003cbr\u003eStepper Motor Wire 1pc\u003cbr\u003eV-slot Wheel 3pcs\u003cbr\u003eFixed Backplanex lpc\u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e1x FULL Set 3D Printer Extruder Kits\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cspan\u003eWarranty:\u003c\/span\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003c\/span\u003e\u003cbr style=\"white-space: normal;\"\u003e\u003cspan\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"12V For CR-10 10sS4S5","offer_id":50633207120111,"sku":"W002-A192","price":63.78,"currency_code":"USD","in_stock":true},{"title":"24V For Ender3 3Pro 3v2","offer_id":50633207152879,"sku":"W002-A193","price":54.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/sku1.jpg?v=1787946645"},{"product_id":"replacement-printer-print-head-for-e-pson-1390-1400-1410-1430-l1800-1500w","title":"Replacement Printer Print Head For Epson 1390\/1400\/1410\/1430\/1500W","description":"\u003cspan data-mce-fragment=\"1\"\u003eFeature:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eExcellent performance and high quality.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMade of high-quality material, durable, firm and stable for us to use.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is a cleaned, thoroughly tested and sealed Printhead.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGood stability, long lifespan.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFull color function.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProduct Condition : Original Refurbished Printhead ,95% New.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWarranty : One Year Free Warranty , Life-long Service.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSize:80x50mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOEM code: F173030\/F173050\/F173060\/F173070\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible Models:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003efor epson Stylus Photo 1390\/1400\/1410\/1430\/1500W\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003efor epson Stylus Photo R260\/R265\/R270\/R330\/R360\/R380\/R390\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003efor epson Stylus Photo RX560\/RX580\/RX585\/RX590\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003efor epson Stylus Photo D870\/G850\/G4500\/A820\/A920\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePacking includes:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1 x Reufrbished print head\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eMust read when buying nozzles\u003c\/b\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe nozzle is the most core part of the inkjet printer. More than 90% of the effect and quality of the machine's image are determined by the nozzle. However, the nozzle is the most expensive and most easily damaged part of the inkjet printer. Because of these particularities, the manufacturer has done a variety of harsh tests before the nozzle leaves the factory, and there will be no quality problems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe nozzle is fragile and expensive, please inspect the goods in front of the courier, if you find any crushing or abnormality, please contact us in time and reject the goods!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e〔Maintenance is a technical job. If you don’t know the technology, there is a big risk. After confirming the problem, replace the nozzle and install it carefully. Otherwise, the main board and the nozzle will be burned. Please operate carefully! There are many things to pay attention to on the nozzle, so blind replacement by non-professionals is likely to cause damage, so there is a regulation in the industry that the nozzle is not guaranteed, delicate items, please do not try the machine, please be careful. If you are not familiar with the machine, it is recommended to send it to a maintenance station or find a professional to replace the nozzle, so as to avoid unnecessary loss and trouble.]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eTechnical Breakdown\u003c\/b\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBefore the nozzle of the machine was broken, especially if the ink leaked, some of them would burn out the motherboard, so replace it with a new one.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBefore the nozzle, the main board must be eliminated, and the main board insurance F1 and F2 can only be replaced with original ones.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor the same insurance, the pair tube can only be replaced with the original one of the same model, and the insurance with high current value or a different type of pair tube can be replaced.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTubes are likely to burn the nozzle and the main board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eTherefore, everyone must do the following work before purchasing the nozzle\u003c\/b\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1. If the machine reports an error (that is, the red light flashes when it is turned on), it may not be that the nozzle is broken. It may be that there is a problem with the frame or the main board. In this case, please solve the error problem before buying the nozzle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2. Both the main board and the nozzle are burnt out, you need to replace the main board first, and then check the nozzle!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3. Is there any sign of splitting, corrosion or burning of the data cable? If the data cable is broken or not plugged in place, it will burn the nozzle and the main board. Please be sure to check the data head cable!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4. For customers whose machine is too old, for example, there is a lot of ink in it, and the machine is very dirty, it is recommended not to change the nozzle, it is best to change the machine directly! In order to avoid buying a nozzle and then installing it, saying that the effect is not good or something, it is very troublesome. And it's not worth repairing!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e5. It is recommended that you confirm whether the quality of your ink cartridge or ink or continuous supply is good. The continuous supply that has been used for a long time, the dirty continuous supply that spills a lot of dust and ink everywhere is recommended to replace it with a new one. The continuous supply of good quality, this is responsible for me and you! Solve big problems for a little money! And there is so much ink in the new continuous supply! It's worth it!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e6. Please do not tear up the warranty label with the company's name on each nozzle (please do not disassemble the nozzle by yourself), otherwise there will be no warranty and no return or exchange!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003ePrecautions when changing nozzles\u003c\/b\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1. After receiving the nozzle purchased in our store, I used a needle to inject water to check the nozzle when I went back to see if it was clogged. This is a very redundant and dangerous method. The original nozzles are equipped with protective fluid, which can ensure that the nozzles will not be blocked within one or two years. After the nozzles are received, do not wipe off the protective fluid on the nozzles. Do not use a syringe to inject the nozzle, it may cause the ink sac to rupture and print cross-color! For your rights, please know! Use of this method results in damage to the print head without warranty! First of all, once the nozzle is in the water, you can turn on the machine without drying it, and it will burn the board if it is light, or burn the head if it is serious; secondly, the nozzles sold in our shop are shipped after strict inspection and testing, and are protected If you use a needle to inject water into the head, not only will the protective liquid in the head be washed away, but also because the pressure of the hand is too high, it is easy to cause the nozzle to be blocked, resulting in no ink;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2. The head surface of the nozzle is very fragile and must not be bumped, so it must be protected. Its outer layer is a block of aluminum, and the inner layer is coated with a crystal oscillator and very small ink tubes. It will be dented, deformed, or even broken when touched, and the nozzle will be scrapped;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3. Be careful when installing the nozzle. Be sure to cut off the power first and install it in place. After installation, gently push the car to move left and right with your hands to check whether it is smooth. Do not turn on the power immediately after installation, because if the head is not in place, the car will easily break the head when it moves, and the human hand can feel it and retract it freely. , strong controllability;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4. When connecting the plug cable, do not bring ink, and make sure that it is in good contact with the socket and does not touch the pins, otherwise, the nozzle will be short-circuited and burned;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e5. The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not add oil directly to the shaft. Excess oil will flow to the nozzle and cause damage;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e6. After the machine and circuit are correct, it is necessary to check the water circuit. First, check whether the water in the ink cartridge is sufficient or not; secondly, check whether the small cleaning blade and the ink suction pump are dirty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e7. There will be air in the newly installed nozzle, so it will not print normally immediately. Only when the air in the nozzle is completely exhausted can the lines be aligned normally; first, it can be cleaned intermittently (only 2 times at a time, and then stop for 30 minutes. Then wash it 2 times) Repeated over-cleaning will cause the cleaning pump to accumulate ink, which will not only cause printing color mixing, ink leakage, but also waste ink; secondly, you can print more pictures to let the nozzle discharge air during work; Thirdly, if the machine has led out the waste ink tube, you can turn off the power first, and then use a rubber tube with a syringe to draw out the waste ink tube until 3-5ML of ink is drawn out, then turn on the machine and clean it once with the machine normally, which is equivalent to Artificially sucking out the air in the head, the side effect is that it is easy to cause the cleaning pump to pile up ink.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50633246310639,"sku":"W002-D022","price":152.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D022-2.jpg?v=1787947698"}],"url":"https:\/\/ktopteng.com\/en-au\/collections\/pcprinters.oembed?page=2","provider":"ktopteng","version":"1.0","type":"link"}