{"title":"Featured Deals","description":null,"products":[{"product_id":"hp-officejet-pro-8630-printhead-950-951-copy","title":"Hp officejet pro 8640 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713728751,"sku":"W002-D005~11","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-6.jpg?v=1787484785"},{"product_id":"hp-officejet-pro-8620-printhead-950-951-copy","title":"Hp officejet pro 8630 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713761519,"sku":"W002-D005~10","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-6_41585c84-3d35-41c2-b4fb-82560a2c1b08.jpg?v=1787484786"},{"product_id":"hp-officejet-pro-8610-printhead-950-951-copy","title":"Hp officejet pro 8620 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713794287,"sku":"W002-D005~9","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-6_6bad912b-3e32-451d-8049-912df46c4289.jpg?v=1787484790"},{"product_id":"hp-officejet-pro-276dw-printhead-950-951-copy","title":"Hp officejet pro 8610 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713827055,"sku":"W002-D005~8","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_1b34f9d1-3c75-4d17-bcb2-0005876126ca.jpg?v=1787484792"},{"product_id":"hp-officejet-pro-251dw-printhead-950-951-copy","title":"Hp officejet pro 276dw Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713859823,"sku":"W002-D005~7","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_a7f0f1fe-1d94-4929-b9f2-8c15965fdc18.jpg?v=1787484793"},{"product_id":"hp-officejet-pro-n811a-printhead-950-951-copy","title":"Hp officejet pro 251dw Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713892591,"sku":"W002-D005~6","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_6159de56-c6c0-4eab-a0bf-2c13d165e4fd.jpg?v=1787484795"},{"product_id":"hp-officejet-pro-cm752-printhead-950-951-copy","title":"Hp officejet pro N811A Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713925359,"sku":"W002-D005~5","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_d4a42d9a-acef-4835-840c-1d98476877fa.jpg?v=1787484797"},{"product_id":"hp-officejet-pro-cm751-printhead-950-951-copy","title":"Hp officejet pro CM752 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713958127,"sku":"W002-D005~4","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_8554f74f-d1dd-43f0-aaa1-cd6b012abafd.jpg?v=1787484799"},{"product_id":"hp-officejet-pro-8600-printhead-950-951-copy","title":"Hp officejet pro CM751 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563713990895,"sku":"W002-D005~3","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_1039a748-a873-4ae2-b0df-3881585ade2f.jpg?v=1787484801"},{"product_id":"hp-officejet-pro-8100-printhead-950-951-copy","title":"Hp officejet pro 8600 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563714023663,"sku":"W002-D005~2","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_ce4afe88-1dd3-45b1-bb51-372958921cda.jpg?v=1787484803"},{"product_id":"printhead-950-951-for-hp-officejet-pro-8100-8600-8610-8620-8630-8640-251dw-276dw-copy","title":"Hp officejet pro 8100 Printhead 950 951","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563714089199,"sku":"W002-D005~1","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_ce7caac8-37a5-42ec-8c16-fd986da74caa.jpg?v=1787484805"},{"product_id":"hp-officejet-pro-8720-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8730 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563798991087,"sku":"W002-D030~10","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1.jpg?v=1787486821"},{"product_id":"hp-officejet-pro-7740-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8720 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563799548143,"sku":"W002-D030~9","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_cb4e44df-8ecf-49f2-b0ec-dd5e9cd09139.jpg?v=1787486823"},{"product_id":"hp-officejet-pro-7720-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 7740 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563799744751,"sku":"W002-D030~8","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_93de2893-5583-4c1f-a7e3-bfea10436325.jpg?v=1787486824"},{"product_id":"hp-officejet-pro-8210-printhead-952-953-954-955-j3m72-80004-copy-1","title":"Hp Officejet Pro 7720 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563799941359,"sku":"W002-D030~7","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_70596185-8b90-4af7-b7d2-23940e6fb13a.jpg?v=1787486826"},{"product_id":"hp-officejet-pro-8702-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8210 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563800301807,"sku":"W002-D030~6","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_201bece0-652d-462c-932e-785acfb149e6.jpg?v=1787486828"},{"product_id":"hp-officejet-pro-8715-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8702 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563800334575,"sku":"W002-D030~5","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_a3490281-7d0e-4fcb-b56a-2caa4d836076.jpg?v=1787486829"},{"product_id":"hp-officejet-pro-8710-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8715 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563800695023,"sku":"W002-D030~4","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_dbc096d3-e2f4-4d52-964c-c341178c842b.jpg?v=1787486831"},{"product_id":"hp-officejet-pro-8216-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8710 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563801383151,"sku":"W002-D030~3","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_32b6c38b-d2ec-4a3b-aa9d-f5e5b7ac2c1d.jpg?v=1787486832"},{"product_id":"hp-officejet-pro-8210-printhead-952-953-954-955-j3m72-80004-copy","title":"Hp Officejet Pro 8216 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" height=\"813\" width=\"1573\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cimg data-mce-fragment=\"1\" height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg height=\"450\" width=\"450\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" style=\"float: none;\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563801579759,"sku":"W002-D030~2","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_63bced46-eed9-4a5d-9c82-731b9a2a7364.jpg?v=1787486833"},{"product_id":"printhead-952-955-for-hp-officejet-pro-8710-7740-7720-8720-8730-8740-8210-953-copy","title":"Hp Officejet Pro 8210 Printhead 952 953 954 955 J3M72-80004","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50563801776367,"sku":"W002-D030~1","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_acd565e3-8d78-446d-b9a1-101e75416b88.jpg?v=1787486835"},{"product_id":"printhead-952-955-for-hp-officejet-pro-8710-7740-7720-8720-8730-8740-8210-953","title":"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"1573\" height=\"813\" src=\"https:\/\/www.youtube.com\/embed\/SSx69q8TE-A?\u0026amp;autoplay=1\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eSize:104x90MM\u003cbr\u003eOEM Part Number: J3M72-80004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003cbr\u003eRefurbished 952 953 954 955 Printhead\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 8216\u003cbr\u003eFit For Hp Officejet Pro 8710\u003cbr\u003eFit For Hp Officejet Pro 8715\u003cbr\u003eFit For Hp Officejet Pro 8702\u003cbr\u003eFit For Hp Officejet Pro 8210\u003cbr\u003eFit For Hp Officejet Pro 7720\u003cbr\u003eFit For Hp Officejet Pro 7740\u003cbr\u003eFit For Hp Officejet Pro 8720\u003cbr\u003eFit For Hp Officejet Pro 8730\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-2_480x480.jpg?v=1608087420\" width=\"450\" height=\"450\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 952 print head\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.\u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document,\u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition,\u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.\u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive.\u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Printhead 952 955 for HP Officejet Pro 8710 7740 7720 8720 8730 8740 8210 953\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D030-3.jpg?v=1609904620\" width=\"450\" height=\"450\"\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns:Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online:Solve your installation and product problems\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50631409271023,"sku":"W002-D030","price":92.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D030-SKU1_bc9aabeb-c3aa-405a-abde-cd1e46392db7.jpg?v=1787909589"},{"product_id":"printhead-950-951-for-hp-officejet-pro-8100-8600-8610-8620-8630-8640-251dw-276dw","title":"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632546943215,"sku":"W002-D005","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D015-5_ac3edc7d-f1cf-4028-b7dc-e5e027d3d0fa.jpg?v=1787931487"},{"product_id":"printhead-950-951-for-hp-officejet-pro-cm751-cm752-8100-8600-8610-251dw-276dw","title":"Printhead 950 951 For HP Officejet Pro CM751 CM752 8100 8600 8610 251dw 276dw","description":"\u003cp\u003e\u003cstrong\u003eBefore you buy this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e\u003c\/strong\u003eThe printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out.\u003cbr\u003e1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser.\u003cbr\u003e2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally\u003cbr\u003e3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily).\u003cbr\u003e4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-_1_480x480.jpg?v=1608084527\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore you install this product, you need to pay attention to:\u003c\/strong\u003e\u003cbr\u003e1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.\u003cbr\u003e2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.\u003cbr\u003e3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.\u003cbr\u003e4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.\u003cbr\u003e5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.\u003cbr\u003e6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.\u003cbr\u003e\u003cbr\u003eReufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1.Excellent performance and high quality.\u003cbr\u003e2.Made of high-quality material, durable, firm and stable for us to use.\u003cbr\u003e3.This is a cleaned, thoroughly tested and sealed Printhead.\u003cbr\u003e4.Good stability, long lifespan.\u003cbr\u003e5.Full color function.\u003cbr\u003e6.Size:104x90MM\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFits Following Model(s):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRefurbished 950 951 Printhead \u003cbr\u003eFor Hp officejet pro 8100 \u003cbr\u003eFor Hp officejet pro 8600\u003cbr\u003eFor Hp officejet pro CM751\u003cbr\u003eFor Hp officejet pro CM752 \u003cbr\u003eFor Hp officejet pro N811A \u003cbr\u003eFor Hp officejet pro 251dw \u003cbr\u003eFor Hp officejet pro 276dw \u003cbr\u003eFor Hp officejet pro 8610 \u003cbr\u003eFor Hp officejet pro 8620 \u003cbr\u003eFor Hp officejet pro 8630 \u003cbr\u003eFor Hp officejet pro 8640\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePacakge Included:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1 x print head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Printhead 950 951 For HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw 276dw\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/W002-D015-1_480x480.jpg?v=1608084488\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. \u003cbr\u003eAfter loading the print head, please don't install ribbon overhead 10 pieces of A4 document, \u003cbr\u003eso that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.\u003cbr\u003e2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,\u003cbr\u003eso please troubleshoot the problem of the mainboard before replacing the print head. In addition, \u003cbr\u003ethe F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.\u003cbr\u003eIf replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.\u003cbr\u003e3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. \u003cbr\u003eThere is a regulation that printhead is not warranty, and it is delicate and expensive. \u003cbr\u003eplease do not make commissioning on the machine, and please treat it with caution.\u003cbr\u003e4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003cbr\u003e\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632546975983,"sku":"W002-D005~2","price":119.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/W002-D005-_1.jpg?v=1787931489"},{"product_id":"dn20-3-4-brass-adjustable-water-pressure-reducing-regulator-valves-with-gauge","title":"DN20 3\/4\" Brass Adjustable Water Pressure Reducing Regulator Valves With Gauge","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e1: Reliable and durable.\u003cbr\u003e2: Simple internal structure, fine workmanship.\u003cbr\u003e3: Apply to Hydraulic instability, water flow too fast, water purifiers, solar energy, gas heater and faucet.\u003cbr\u003e4: Valve working principle can be simply understood as the entrance pressure and outlet pressure = spring force, through the control valve closure flow inside the opening of the size to control the pressure at the outlet, the water through the opening, closure and fluid resistance is small, the pressure loss is small, the outlet pressure is greater, and vice versa outlet pressure is small.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eCondition: 100% Brand New\u003cbr\u003eMaterial: Brass\u003cbr\u003eSize: approx.85*63mm\u003cbr\u003eConnector size: approx. 3\/4\"\u003cbr\u003eWater pressure: PN 1.6\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Please allow 1-5mm errors due to manual measurement.\u003cbr\u003e2.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x Pressure Regulator\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e\u003cbr\u003eFree Shipping\u003cbr\u003eItem location: Sydney Warehouse\u003cbr\u003eDelivery Time: 3-6 working days\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50632548385007,"sku":"I012-A008","price":33.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/3e67dadeb63923bd63e5c55b65b46df8.jpg?v=1787931543"},{"product_id":"abs-plastic-motorcycle-windscreen-windshield-for-harley-dyna-softail-models","title":"ABS Plastic Motorcycle Windscreen Windshield for Harley Dyna Softail Models Generic","description":"\u003cp\u003e\u003cstrong\u003eABS Plastic Motorcycle Windscreen Windshield Fit for Harley Dyna Softail Models Generic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003eSince this windshield is a modified product, please check the size before purchasing! ! !\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/1_3653a84d-d511-457e-9af4-99c4eba535b6_480x480.jpg?v=1650878800\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1:Improve the aerodynamics of your motorcycle and deflect more wind to provide relaxing and safe ride for driver.\u003cbr\u003e2:Enhancing the design of your motorcycle.\u003cbr\u003e3:Aftermarket parts, for modify use.\u003cbr\u003e4:Easy to install,without instructions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifics:\u003c\/strong\u003e\u003cbr\u003eCondition:100% Brand New\u003cbr\u003eMaterial: ABS plastic\u003cbr\u003ePlacement on Vehicle: Front\u003cbr\u003eTransparency:Transparent\u003cbr\u003eFork diameter\u0026lt;0mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitments:\u003c\/strong\u003e\u003cbr\u003eUniversal for Harley Dyna Softail models, such as:\u003cbr\u003eFor FXST Softail 2005-2011\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXSTB Night Train 2000-2009\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXSTC Softail Custom 2007-2010\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXSTD Softail Deuce 2001-2007\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXS Blackline 2011-2013\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXDB Street Bob 2006-2019 (Fits 2018 FXBB)\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXDC Super Glide 2000-2014\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXDX Super Glide Sport 2000-2005\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXDL Low Rider 1996-2018\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXDC Wide Glide 2000-2017\u003cbr\u003e\u003cspan\u003eFor\u003c\/span\u003e FXSB Breakout 2013-2019\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 piece Windshield\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/p\u003e","brand":"Ktopteng","offers":[{"title":"Black","offer_id":50633193095407,"sku":"WIN-082-Black","price":94.88,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":50633193128175,"sku":"WIN-082-Gray","price":97.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/ef5d2e8262ff5eb0766cf75403a52244.jpg?v=1787946056"},{"product_id":"stator-magneto-for-seadoo-800-951-gtx-gsx-spx-rx-xp-95-03-290886588-420886588","title":"Stator Magneto For SeaDoo 800 951 GTX GSX SPX RX XP 1995-2003 290886588\/ 420886588 Generic","description":"\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003eDirect replacement to your original unit\u003cbr\u003ePlug-and-play, direct fit, easy installation.\u003cbr\u003eHighest grade lamination materials.\u003cbr\u003eHighest grade copper windings, resistant to 200 degrees Celsius.\u003cbr\u003ePick up pulsar coil included.\u003cbr\u003eConnector included.\u003cbr\u003eAll products shipped are tested.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003cbr\u003eCondition: Aftermarket 100% Brand New\u003cbr\u003eQuanity: 1PC\u003cbr\u003eType: Generator Stator Coil\u003cbr\u003eReplacement Part Number: 290886588, 420886588\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions :\u003c\/strong\u003e\u003cbr\u003eInterior diameter : 35mm \/ 1.36\"\u003cbr\u003eExterior diameter : 93mm \/ 3.68\"\u003cbr\u003ePole's Thickness : 24mm \/ 0.95\"\u003cbr\u003ePole's Width : 11.4mm \/ 0.44\"\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"Stator Magneto For SeaDoo 800 951 GTX GSX SPX RX XP 95-03 290886588\/ 420886588 Generic\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0050\/2212\/2102\/files\/M550-A368-2.jpg?v=1617438520\" width=\"451\" height=\"451\"\u003e\u003cbr\u003e\u003cstrong\u003eOther specifications :\u003c\/strong\u003e\u003cbr\u003eNumber of wires: 6\u003cbr\u003eNumber of pins: 6\u003cbr\u003eNumber of plugs: 1\u003cbr\u003eNumber of fixation holes: 3(+3)\u003cbr\u003eNumber of poles: 18\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFITMENTS:\u003c\/strong\u003e \u003cbr\u003eFits Sea-Doo 800 GSX 1996-1998\u003cbr\u003eFits Sea-Doo GSX Limited 1998-1999\u003cbr\u003eFits Sea-Doo 800 GTX 1996-1997\u003cbr\u003eFits Sea-Doo GTX 1996-1997\/2000-2002\u003cbr\u003eFits Sea-Doo GTX Limited 1998-1999\u003cbr\u003eFits Sea-Doo 800 SPX 1997-1999\u003cbr\u003eFits Sea-Doo 800 XP 1995-1997\u003cbr\u003eFits Sea-Doo 951 GSX Ltd 1998-1999\u003cbr\u003eFits Sea-Doo 951 GTX 2000-2002\u003cbr\u003eFits Sea-Doo 951 GTX Ltd 1998-1999\u003cbr\u003eFits Sea-Doo 951 LRV 2000-2001\u003cbr\u003eFits Sea-Doo 951 RX 2000-2002\u003cbr\u003eFits Sea-Doo 951 RX X 2001\u003cbr\u003eFits Sea-Doo 951 XP 2000-2002\u003cbr\u003eFits Sea-Doo 951 XP Ltd 1998-1999\u003cbr\u003eFits Sea-Doo XP 1996-1997\/2000-2002\u003cbr\u003eFits Sea-Doo Challenger 782 cc 110 hp 1996-1997\u003cbr\u003eFits Sea-Doo Speedster 1564 cc 220 hp 1998-1999\u003cbr\u003eFits Sea-Doo Sportster LE 950 cc 130 HP 2000-2003\u003cbr\u003eFits Sea-Doo Challenger 1800 1997-1999\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePACKAGE INCLUDED:\u003c\/strong\u003e\u003cbr\u003e1x Generator Stator Coil\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e\u003cbr\u003eBefore installing your new stator\u003cbr\u003eCheck the AC output of the stator.\u003cbr\u003eReplace any burned or corroded connectors on stator and regulator\/rectifier.\u003cbr\u003eCheck and repair any melted wiring.\u003cbr\u003eUse hi-temp dielectric grease on all connectors\u003cbr\u003eOur stator may use a different wire color code than your original. \u003cbr\u003eAll of the wires are installed in the correct order; please do not change any of the wiring configurations.\u003cbr\u003eThis stator is designed as a direct plug-in replacement and should be used as such.\u003cbr\u003eWhen bolting stator in, always use locking compound.\u003cbr\u003eIf our stator includes a pickup coil, always make sure the air gap is correct upon installation.\u003cbr\u003eAll item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eReturns: Customers have the right to apply for a return within 60 days after the receipt of the product\u003cbr\u003e24-Hour Expert Online: Solve your installation and product problems\u003c\/span\u003e\u003c\/div\u003e","brand":"Ktopteng","offers":[{"title":"Default Title","offer_id":50638651359471,"sku":"M550-A368","price":42.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/9554\/5327\/files\/M550-A368-SKU1.jpg?v=1787984552"}],"url":"https:\/\/ktopteng.com\/en-au\/collections\/featured-deals.oembed","provider":"ktopteng","version":"1.0","type":"link"}